EnGenius Network ECB1750 Dual Band Wireless Access Point/Client 802.11ac 3×3 Retail

$311.12

SKU: L572-AIP-154216 Category:

Description

EnGenius Network ECB1750 Dual Band Wireless Access Point/Client 802.11ac 3×3 Retail

When set to Client Bridge mode, Ethernet-enabled devices such as printers and copiers can join a businesss existing wireless network when they are connected to the ECB1750s Gigabit Ethernet port, making applications like printing from wireless laptops or tablets even easier. In WDS mode, the ECB1750 enables a companys wireless network to be expanded without a wired connection between devices.

The ECB1750 features Quantum Beam technology on the 5 GHz band which finds the most efficient signal path to AC compatible computers and other devices (up to 1300 Mbps) exceeding wired Gigabit speeds and nearly 3x faster than Wireless N. The ECB1750s Gigabit Ethernet port also offers greater bandwidth capacity and faster data transfers through the network. This means that bandwidth sensitive applications such as video and VoIP (Voice over IP) perform with improved quality and a minimum of packet loss.

The ECB1750 also features Band Steering that shifts wireless traffic for Dual Band-capable clients to the 5 GHz band from the 2.4 GHz band, which helps to relieve network congestion and maintain optimal throughput speeds.

Hardware
RF: 2.4 and 5 GHz Frequency Bands
Standards: IEEE 802.11a/n/ac on 5 GHz IEEE 802.11b/g/n on 2.4 GHz
Radio I: 11b/g/n: 2.412-2.484 GHz
Radio II: 11a/n: 5.18-5.24, 5.26-5.32, 5.5-5.7 and 5.745-5.825 GHz
Data Rate: Up to 300 Mb
Antenna Array
Six (6) External 5 dBi Omni-Directional Antennas

Physical Interface
1 x RJ-45 Gigabit Ethernet (10/100/1000 Mbps) Port with PoE Support
1 x Reset Button
Power Jack
Power Requirements
Power Supply: 90 to 240 VDC 10%, 50/60 Hz
(depends on different countries)
Active Ethernet (Power-over-Ethernet, IEEE 802.3at/af)
Power Adapter (United States) 48VDC/0.375A
Device: 12V/2A

Modulations </
Available Transmit Power
(Max. Power may be different depending on local regulations)
802.11n (5 GHz)
27dBm at MCS0-2/MCS8-10
26dBm at MCS3/MCS11
25dBm at MCS4/MCS12
23dBm at MCS5/MCS13
22dBm at MCS6/MCS14
21dBm at MCS7/MCS1
802.11n (2.4 GHz):
27dBm at MCS0-2/MCS8-10
27dBm at MCS3/MCS11
26dBm at MCS4/MCS12
25dBm at MCS5/MCS13
24dBm at MCS6/MCS14
23dBm at MCS7/MCS15
802.11a (5 GHz):
26dBm at 6-24Mbps
25dBm at 36Mbps
23dBm at 48Mbps
21dBm at 54Mbps
802.11b (2.4 GHz):
7dBm at 1-11Mbps
Wireless
Wireless Mode: 11a/11b/11g/11n
Channel selection (settings vary by country)
Channel bandwidth (Auto, 20 MHz, 40 MHz)
Transmission rate:
2.4 GHz: 11n only, 11b/b/n mix, 11b only, 11b/g, 11g only
5 GHz: 11n only, 11a/n mix
Software
Topology :Infrastructure/Ad-Hoc
QoS:WMM (Wireless Multimedia)
VPN:Pass-through (PPTP, L2TP, IPSec)
WPS:Software only
Management
Tx Power Control:Adjust transmit power by dBm

Configuration:Web-based configuration (http)/TelnetTelnet Server: CLI
Firmware Upgrade: Via web browser, settings are reserved after upgrade
Administrator Setting: Administrat
Item Dimension (LxWxH):
12 x 9 x 3

Weight:
2.8 lb

Warranty Information:
3 years

Package includes: EnGenius Network ECB1750 Dual Band Wireless Access Point/Client 802.11ac 3×3 Retail
WARRANTY: 1 Year Direct Manufacturer Warranty

Additional information

Weight3.05 lbs
UPC

655216006850

MPN

ECB1750

Reviews

There are no reviews yet.

Be the first to review “EnGenius Network ECB1750 Dual Band Wireless Access Point/Client 802.11ac 3×3 Retail”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.